Stainless steel reactor cleaning electric heater cleaning is a common decontamination method, the important use of circulating pump mechanical equipment tubular reactor and some removal of high temperature radioactive substances. Proper cleaning methods not only ensure quality but also improve efficiency, and many consumers choose not to do all cleaning.

For a long time, stainless steel has accumulated a lot of residue in tubular reactor, which not only damages the effective service life of tubular reactor, but also damages the high sewage treatment and cleaning efficiency of tubular reactor. Place the reflector valve from the automatic exhaust valve into the tea set, clean up most of the residue, pour into the water and stir for about 10 minutes.

During cleaning, the lid sampling valve should be cleaned and a small amount of sampling valve should be obtained in the teapot. N2. Add 70% anhydrous ethanol and anhydrous ethanol in the middle. Stainless steel reactors are used to handle liquids and some highly corrosive liquids and items. After a period of time, try to remove the residue to ensure that the mechanical equipment is not corroded by the residue.

In the production process of stainless steel reactor, the inner wall of stainless steel reactor can be selected with different speeds according to the viscosity of different production processes.

During the entire operation of the stainless steel reactor, two high-speed dispersing shaft dispersers will be cut and mixed to level by fiber laser, and magnetic coils in the elastic chuck can be cooled. The middle frame is mixed with the scratch shaft, scraping the wall while mixing. Make raw materials.

To a certain extent, the electronic components of the hybrid control circuit are assembled on the circuit board, using the double closed-loop control system software system. It has the characteristics of high precision speed regulation, stable speed regulation, strong anti-interference ability, and has the advantages of limiting overspeed and overcurrent.