Do you know the purpose of fermenter maintenance? Now I'm going to take you through it.

Fermenter refers to an industrial device used to carry out microbial fermentation. Its main body is generally made of stainless steel plate main cylinder, its volume between 1m³ to hundreds of m³. In the design and processing should pay attention to the structure of strict, reasonable.

It can withstand steam sterilization, has certain operating flexibility, reduce internal accessories as far as possible (avoid dead corners), strong material and energy transfer performance, and can be adjusted to a certain extent in order to clean, reduce pollution, suitable for the production of a variety of products and reduce energy consumption.

In order to better ensure the normal operation of the fermenter, the customer should not only understand the structure, characteristics of each component of the system software, the efficacy of the pipe and gate valve, but also attach great importance to the maintenance of the system software. The maintenance of fermenter system software can be divided into two methods: peacetime and time. Fermenter maintenance, cleaning and maintenance. The fermenter is the place where raw materials are immediately exposed. The surface smoothness and the cleanliness of the inner precast components are the key factors to avoid bacterial contamination. Therefore, after each alcoholization, be sure to connect the caps together, remove them vertically, remove all electrical levels, and place them in a safe area. Scrub the tank and internal prefabricated components with a neutral cleaner. (When cleaning the gas diffuser, it is better not to open or close, otherwise it will endanger the ventilation volume measurement of the whole process of alcohol.

In addition, to solve the tank, inlet and outlet valve of some O-ring, such as deformation, embrittlement, scratch and other conditions, should be removed and replaced immediately. After cleaning and reinstalling, clean the outer surface and tank holder with a clean towel to ensure reserve. If the fermenter is not in use for a long time, remove all electrical stages and store as required, then expose the water storage in the tank and the water storage in all pipes, close the gate valve and maintain the fermenter with a dust cloth. Mixing system software maintenance Mixing system software includes mixing shaft, agitator, machine seals, rolling bearings, connecting shaft and motor.